UNS C12200 is a commercially pure copper that is phosphorus deoxidized, with high residual phosphorus. It is also known as DHP copper. It is widely used for the manufacture of seamless copper water tubes in accordance with ASTM B88. The UNS C12200 seamless copper tubes are mainly intended for general pluming and the conveyance of other similar fluids. They are …
ASTM B88 UNS C12200 copper tubes are seamless copper water tubes made from copper alloy UNS C12200, which is a commercially pure copper that has been deoxidized with phosphorus, leaving a relatively high residual phosphorus content. It is not susceptible to hydrogen embrittlement, but is of relatively low electrical conductivity due to the amount of phosphorus present. UNS C12200 is …
ASTM B88 copper tubes are seamless copper water tubes suitable for general pluming, similar applications for the conveyance of fluids. These tubes are available in nominal or standard size 1/2″ through 12″, and are classified into three types according the wall thickness: Type K, Type L, and Type M. They shall be marked with different color codes: green for Type …
Superior heat exchange solution: ASTM B111 UNS C68700 tubes Condenser tubes made of ASTM B111 UNS C68700, also known as “aluminum brass”, offer exceptional corrosion & erosion resistance, thermal conductivity, and mechanical properties, making them ideal for a wide range of heat exchange applications. UNS C68700 is an alloy containing nominally 77.5% copper, 2% aluminum, and 20.5% zinc with a …
ASTM B163 UNS N04400 seamless tubes for heat exchangers and condensers are engineered from Nickel-Copper alloy UNS N04400, renowned for exceptional corrosion resistance and thermal conductivity. ASTM B163 is a standard set by ASTM International that specifies the requirements for seamless nickel and nickel alloy condenser and heat-exchanger tubes, Monel 400 is a common trade name for the nickel-copper alloy …
The ASTM B111 C71500 seamless condenser tubes are made from a copper-nickel alloy that contains approximate 70% Cu and 30% Ni in weight percent. Its nominal composition was once designated as “Cu-30Ni-0.5Fe” or “70Cu-30Ni”. Hence they are also called “CuNi 70/30 condenser tubing“. Similar to C70600, C71500 is among the most corrosion resistant and thermally stable of all the copper …
ASTM B111 is the standard specification for copper and copper-alloy seamless condenser tubes and ferrule stock. When dimensional inspection is finally conducted, outside diameter, wall thickness and length of the tubing shall be examined in accordance with Section 14 of the standard. The dimensions & permissible variations (tolerances) prescribed in Section 14 are applicable to ASTM B111 seamless condenser tubes …
The seamless tubing made of ASTM B111 UNS C70600 is a typical copper-nickel tubing for use in surface condensers, evaporators, and heat exchangers. ASTM B111 C70600 is also know as “CuNi 90/10” or “copper-nickel, 10%”, indicating the nominal composition of 90% copper and 10% nickel. It usually exhibits a soft lavender or light purple metal luster, thus, is sometimes called …
Miscellaneous tubes/ tubing can be classified according to: Material: carbon steel tubing, low-alloy steel tubing, alloy steel tubing, stainless steel tubing, nickel alloy tubing, titanium tubing, aluminum tubing, copper tubing, zirconium tubing, special metal tubing, rubber tubing, plastic tubing, glass tubing. Application: pressure tubing, instrumentation tubing, hydraulic tubing, mechanical tubing, structural tubing, boiler tubing, superheater tubing, furnace tubing, heater tubing, …